BMS Caretaker Agent
Catch the failure before the alarm. Then do the work that follows.
Inspectr continuously monitors your buildings, catches developing faults and investigates what matters. Every finding comes with the context, likely cause and next step, ready to act on.
Today
An alarm comes in. The team checks the BMS, works through the CMMS and pieces together what's actually happening.
What it costs
Time goes into separating noise from real faults. The investigation doesn't always make it onto the work order, while developing problems can go unnoticed until they become failures.
With Inspectr
Faults are caught early, investigated and prioritized. The team gets the full picture and a clear next step, with the work already prepared.
In one estate
One failure. 400+ alarms.
A single refrigeration failure triggered more than 400 alarms. Inspectr filters out the noise and prioritizes what matters, giving the team a short list of investigated findings instead of hundreds of individual alerts.
One piece of work
Heating an empty building. 13 nights out of 14.
Before
“Two 'too cold' tickets on that unit. One's five weeks old.”
The complaints are about mornings. The cause is overnight. Nothing joins them.
With Inspectr
One issue. The full picture.
The finding
Supply air peaks at 33–39°C overnight while the floor sits at 16–18°C. The valve is moving, so it's live control, not a stuck sensor. Most likely a heating valve that isn't seating closed.
The impact
Eight hours a night, most nights of the year, heating a building nobody is in. Costed against the site's gas rate.
The next step
Check the valve remotely first. If it holds open after the call drops, the site visit is a replacement, not a diagnosis.
It doesn't wait
The work starts when the signal arrives.
- 01DetectCatch developing faults before the alarm.
- 02PrioritizeCut through the noise and surface what matters.
- 03InvestigateEstablish the cause and the impact.
- 04ActPrepare the remote fix, the approved setpoint change, or the work required on site.
Inspectr learns which patterns matter in each building, which are noise and which fixes actually held.
What this is worth
Your BMS finds the signals. Inspectr does the work that follows. Find developing faults before they become expensive failures, give your team the context to act earlier, resolve more issues remotely and get the right work done on site.